REXROTH滾珠導軌滑塊型號列表

R165181421
R16518142Z
R165181320
R165181321
R16518132Z
R165181220
R16518122Z
R165181820
R165181821
R16518182Z
R165181120
R165181920
R16518192Z
R165182320
R16518232Z
R165182220
R16518222Z
R165182820
R16518282Z
R165182120
R16518212Z
R165182920
R16518292Z
R165183820
R16518382Z
R165183120
R16518312Z
R165183920
R16518392Z
R165129420
R165129320
R165121420
R165121421
R16512142Z
R165121320
R165121321
R16512132Z
R165121220
R16512122Z
R165121820
R165121821
R16512182Z
R165121120
R16512112Z
R165121920
R16512192Z
R165122320
R16512232Z
R165122220
R16512222Z
R165122820
R16512282Z
R165122120
R16512212Z
R165122920
R16512292Z
R165123820
R16512382Z
R165123120
R16512312Z
R165123920
R16512392Z
R165179420
R165179320
R165171420
R165171421
R16517142Z
R165171320
R165171321
R16517132Z
R165171220
R16517122Z
R165171820
R165171821
R16517182Z
R165171120
R16517112Z
R165171920
R16517192Z
R165172320
R16517232Z
R165172220
R16517222Z
R165172820
R16517282Z
R165172120
R16517212Z
R165172920
R16517292Z
R165173820
R16517382Z
R165173120
R16517312Z
R165173920
R16517392Z
R165139420
R165139320
R165131420
R165131421
R16513142Z
R165131320
R165131321
R16513132Z
R165131220
R16513122Z
R165131820
R165131821
R16513182Z
R165131120
R16513112Z
R165131920
R16513192Z
R165132320
R16513232Z
R165132220
R16513222Z
R165132820
R16513282Z
R165132120
R16513212Z
R165132920
R16513292Z
R165133820
R16513382Z
R165133120
R16513312Z
R165133920
R16513392Z
R165149420
R165149320
R165141420
R16514142Z
R165141320
R16514132Z
R165141220
R16514122Z
R165141820
R16514182Z
R165141120
R16514112Z
R165141920
R16514192Z
R165142320
R16514232Z
R165142220
R16514222Z
R165142820
R16514282Z
R165142120
R16514212Z

REXROTH滾珠導軌滑塊型號列表

般注意事項
般技術數據和計算適用于所有滾珠導軌系統，即所有滾珠滑塊和滾珠導軌。有關單個滾珠滑塊和滾珠導軌的具體技術數據單獨列出。
預加載類
為了覆蓋盡可能廣泛的應用范圍，力士樂滾珠滑塊有不同的預緊等。
以下預加載類可用：
沒有預緊的滾珠滑塊（預載等C0）？
預應力適中的滾珠滑塊（C1）？
平均預載（預緊等C2）的滾珠滑塊？
具有高預緊力的滾珠滑塊（預緊等C3）？
為了防止縮短使用壽命，預緊力不應超過軸承F上的負載的1/3。
般而言，滾珠滑塊的剛性隨著預緊力的增加而上升。如果發生振動，請選擇相應較高的預緊力（≥預緊等C2）。
帶平行導軌的導向系統
在選擇預載等時，同樣要注意軌道允許的平行度偏差（“精度等選擇標準”）。
當準確度等為N的滾珠導軌系統時，我們建議預緊等C0或C1，以避免由于公差引起的扭曲應力。

a) For O-ring
Size 15: Ø 4 · 1.0 (mm)
Size 20 - 45: Ø 5 · 1.0 (mm)
Open lube port if necessary (see general technical notes and information in the "Maintenance" section).
b) Recommended position for pin holes (dimension E4 see general technical notes and information in the "Installation" section)
Rough-drilled holes may be present here from manufacturing. These may be bored open.
c) Lube nipple, size 15 - 20:
Funnel-type lube nipple DIN 3405-A M3x5, B2 = 1.6 mm
When using different lube nipples, pay attention to the screw-in depth of 5 mm!
Lube nipple, size 25 - 45:
Hydraulic-type lube nipple DIN 71412-A M6x8, B2 = 9.5 mm
When using different lube nipples, pay attention to the screw-in depth of 8 mm!
The lube nipple is included in the scope of delivery (not installed).
Connection possible on all sides.
d) Sealing plugs may be present here from manufacturing. Remove before mounting.